Silicone Air Proof RED RTV Gasket Maker , Waterproof And Heat
1, one-part acetic cure;
2, fast curing, permanently flexible;
3, excellent waterproof & weather resistant;
I-Like Red Gasket Maker is for high temperature applications up to
343℃: safe for oxygen sensor equipped vehicles. Excellent heat
control and torque retention for overhead cam and timing chain
Dries tough, flexible and improves high temperature performance.
Resists most engine fluids.
1. Clean the surface to get rid of the rust, oil, or any dirty.
2. Cut the cap point, twists the cap mouth, cut at 45 degree angle
beveling according to need.
3. In order to get the smooth glue, hold the bottle at 45 degree
angle, squeeze the glue through cap mouth.
4. If further sealing needed, please finished operation within 5
minutes, wipe off the surplus glue with dry tissue.
5. After completely solidify, amend the glue by knife.
1, Operation should be carried out in well ventilated area.
2, Keep out of the reach of children; Non-toxic after solidifies
completely, avoid eye contact before solidification, if touches the
eye carelessly, use massive water to wash, if serious go to see a
doctor.3, When operation, must hold the glue steadily, cannot
separate, guards against mixes in the air and form bubble , affects
the seal effect.
4, After operation, take off the cap mouth immediately, close the
packing cover tightly to prevent the moisture enter and cause
solidification. Wipe off the glue left at glue mouth.
5, This product should be operated at temperature 5-40℃, relative
200 sets/box, 6 bpxes/carton；
500 cartons/20‘ft container